COMMENT ⊗   VALID 00009 PAGES
C REC  PAGE   DESCRIPTION
C00001 00001
C00002 00002	.REQUIRE "PUBMAC[DOC,AIL]" SOURCE_FILE
C00006 00003	.SEC |NUMERICAL ROUTINES|
C00012 00004	.SEC |NEW PROCESS FEATURES|
C00018 00005	.SEC |ERROR HANDLING|
C00026 00006	.SEC |INEXHAUSTIBLE STRING SPACE|
C00031 00007	.SEC |RECORD STRUCTURES|
C00045 00008	.SEC |MISCELLANEOUS NEW FEATURES|
C00062 00009	.MAN_BACK
C00064 ENDMK
C⊗;
.REQUIRE "PUBMAC[DOC,AIL]" SOURCE_FILE;
.TITLEPG←TRUE;
.ONECOL
.DOCNAME←"SAIL Addendum #1"
.STAND_FRONT
.SEC |INTRODUCTION|
The following short manual describes the changes that have
happened to SAIL since the publishing of the Manual in July 1973. 
It accurately reflects the state of SAIL, version 7, which was
put up on December 4, 1973.  The reader should be warned that many
of these new features were designed for veteran SAIL hackers.

The reader may also want to refer to the following documents, which 
are usually kept updated.
.LIST(20,0)

MACLIE.WRU[DOC,AIL]\A summary of commonly made errors when using macros and
what to do about them.

TUTOR.DOC[DOC,AIL]\In introduction to LEAP.

LEAP.WRU[DOC,AIL]\A detailed description of the runtime environment of LEAP
for the hardy few who want to interface to LEAP in assembly language. 

SAIL.DOC[AIM,DOC]\The July '73 manual (AIM-204) in LPT form. Warning: this version
is the Stanford character set.  It is also almost 300 pages long.  You can
get a 120 page version, set in two columns of nice type from the National
Technical Information Service, Springfield, Virginia 22151.

LIES[DOC,AIL]\This file contains the know mistakes in the Manual. Soon it will
also contain the known mistakes in this document.
.end
.SEC |NUMERICAL ROUTINES|

A collection of numerical routines has been added to SAIL.  These
are pre-declared in the compiler, and are loaded
from the standard SAIL library.  The functions are quite standard;
following are the equivalent definitions:

.LIST(4,0)
1.\The standard trigonometric functions.  ASIN, ACOS,
ATAN and ATAN2 return results in radians.  The ATAN2 call
takes arc-tangent of the quotient of its arguments;
in this way, it correctly preserves sign information.
.NOFILL

	REAL PROCEDURE SIN (REAL RADIANS);
	REAL PROCEDURE COS (REAL RADIANS);
	REAL PROCEDURE SIND (REAL DEGREES);
	REAL PROCEDURE COSD (REAL DEGREES);

	REAL PROCEDURE ASIN (REAL ARGUMENT);
	REAL PROCEDURE ACOS (REAL ARGUMENT);
	REAL PROCEDURE ATAN (REAL ARGUMENT);
	REAL PROCEDURE ATAN2 (REAL NUMERATOR,DENOMINATOR);

.FILL

2.\The hyperbolic trigonometric functions.
.NOFILL

	REAL PROCEDURE SINH (REAL ARGUMENT);
	REAL PROCEDURE COSH (REAL ARGUMENT);
	REAL PROCEDURE TANH (REAL ARGUMENT);
.FILL
3. \The square-root function:
.NOFILL

	REAL PROCEDURE SQRT (REAL ARGUMENT);
.FILL
4.\A pseudo-random number generator.  The argument specifies
a new value for the seed (If the argument is 0, the
old seed value is used.  Thus to get differing random
numbers, this argument should be zero.)  Results
are normalized to lie in the range [0,1].
.NOFILL

	REAL PROCEDURE RAN (INTEGER SEED);

.FILL
5.\Logarithm and exponentiation functions.  These
functions are the same ones used by the SAIL exponentiation
operator.  The base is e (2.71828182845904).
The logarithm to the base 10 of e is .4342944819.
.NOFILL

	REAL PROCEDURE LOG (REAL ARGUMENT);
	REAL PROCEDURE EXP (REAL ARGUMENT);
.FILL


.END
These functions may occasionally be asked to compute
numbers that lie outside the range of legal floating-point
numbers on the PDP-10.  In these cases, the routines issue
sprightly error messages that are continuable.

.SS |OVERFLOW|
In order to better perform their tasks, these routines enable
the system interrupt facility for floating-point overflow
and underflow errors.  If an underflow is detected, the results
are set to 0 (a feat not done by the PDP-10 hardware, alas).
Be aware that such underflow fixups will be done to every
underflow that occurs in your program.

If you would like to be informed of any numerical exceptions,
you can call the runtime:
.NOFILL

	TRIGINI ( LOCATION(simple-procedure-name) );
.FILL
Every floating-point exception that is not expected by the
interrupt handler (the numerical routines use a special
convention to indicate that arithmetic exception was expected)
will cause the specified simple procedure to be called.  This
procedure may look around the world as described in the
Manual for 'export' interrupt handlers, page 79.
If no TRIGINI call is done, the interrupt routine will simply
dismiss unexpected floating-point interrupts.

.SS |ENTRY POINTS|

In order to avoid confusion (by the loader) with older trig packages,
the entry points of the SAIL arithmetic routines all have a "$" appended
to the end.  Thus, SIN has the entry point SIN$, etc. WARNING: If
a program plans to use the SAIL intrinsic numerical routines, it should
NOT include external declarations to them, since this will probably
cause the FORTRAN library routines to be loaded.

.SEC |NEW PROCESS FEATURES|

.SS|SPROUT APPLY|

The <procedure call> in a SPROUT statement may be an APPLY construct.
In  this case SPROUT will  do the "right" thing  about setting up the
static link for  the APPLY. That is, "up-level" references by the process
will be made to the same variable instances that would be used if the
APPLY did not occur in a SPROUT statement. (See page 77 of the manual.)

However, there is a glitch. The sprout mechanism is not yet smart enough
to find out the block of the declaration of the procedure used to define the procedure
item. It would be nice if it did, since then it could warn the user when 
that block was exited and yet the process was still alive, and thus
potentially able to refer to deallocated arrays and etc. 
What the sprout does instead is assume the procedure was declared in
the outer block. 
This may be fixed  eventually, but in the meantime  some extra care should
be taken  when using  apply in sprouts to  avoid  exiting a  block  with
dependents.
  Similarly, be warned  that the "DEPENDENTS
(<blockid>)" construct  may  not give  the  "right" result  for  sprout
applies. Page 68 of the Manual contains the description of this protection
mechanism for non-APPLY Sprouts.

.SS|SPROUT_DEFAULTS|

SAIL  now provides  a mechanism  by which  the user  may specify  the
"default" options to be used when individual procedures are sprouted.

.EXA

Syntax:
	PROCEDURE <procid> ...
	 BEGIN
	 <some declarations>;
	 SPROUT_DEFAULTS <integer constant>;
	 <perhaps some more declarations>;
	 :
	 :
	 <statements>
	 :
	 END;

.ENDEXA

In other words, SPROUT_DEFAULTS is a declaration.

Semantics:

If  one of the "allocation" fields of  the options word passed to the
SPROUT routine -- i.e. QUANTUM,STRINGSTACK,PSTACK, or  PRIORITY -- is
zero,   then  SPROUT  will look  at  the corresponding  field of  the
specified <integer constant> for the procedure being sprouted. If the
field is  non-zero,   then  that value  will be  used; otherwise  the
current "system" default will be used.

NOTE:  SPROUT_DEFAULTS  only applies  to  "allocations", i.e.   the
process status control bits (e.g. SUSPME) are not affected.

.EXA
Example:

	RECURSIVE PROCEDURE FOO;
	 BEGIN
	 SPROUT_DEFAULTS STRINGSTACK(10);
	 INTEGER XXX;
	 :
	 :
	 END;
	:
	SPROUT(P1,FOO,STRINGSTACK(3));
	SPROUT(P2,FOO);
	COMMENT P1 will have a string stack of 3*32 words.
	 P2 will have a string stack of 10*32 words;

.ENDEXA
.SS |SUSPEND|

SUSPEND now behaves like RESUME in that it returns an item.
.nofill

	itm ← SUSPEND(<process item>)
.fill
Frequently, one is suspending some other process than the one that is executing the SUSPEND
statement. In this case, the item returned is ANY.
 However, in cases like:
.nofill

	X ← SUSPEND(MYPROC);
.fill
where the process suspends itself, it might happen that this process is
made running by a RESUME from another process. If so, then X receives the
<return_item>  that was an argument to the RESUME.

.SS |FAIL AND SUCCEED|
FAIL and SUCCEED now behave like RESUME and SUSPEND in that they also return
an item.  The item returned is ANY unless the Matching Procedure containing
the FAIL or SUCCEED was (1) sprouted as a process, and (2) made running by a
RESUME construct.  In the latter case, the item returned is the <return_item>
that was an argument to the RESUME.  [Note that the only case in which a 
Matching Procedure can be reactivated at a FAIL is by being RESUMEd.]

.SEC |ERROR HANDLING|
.SS |ERROR MODES|
SAIL's error  handler has at  long last been  modified to do  what is
claimed it will do  in Section 20 of the manual (pgs 95 - 97), and in
the description of USERERR (pg 42).  In brief, it allows one to  have
error  messages automatically  sent  to  a "log"  file  while one  is
compiling, and to use USERERR as a trace statement.

The description given in the manual differs from reality in two ways:
"Keep" mode has not  been implemented (the error handler  will flush
all type-ahead except a <lf>);
  all of the  other modes ("Quiet",  "Logging", and
"Numbers") are implemented ONLY  IN THE COMPILER.   However, one  can
get the effect of error modes at runtime by using a brand new feature
called user error procedures.

.SS |USER ERROR PROCEDURES|
A  user error  procedure is a  user procedure  that is run  before or
instead of  the  SAIL error  handler  everytime  an error  occurs  at
runtime.  This  includes all array errors, IO  errors, Leapish errors
and all USERERRs.  It does not include system errors, such as Ill Mem
Ref or Ill UUO. 

The  procedure one uses  for a  user error procedure  must be  of the
following type: 

.CENTER

SIMPLE INTEGER PROCEDURE proc (INTEGER loc; STRING msg, rsp);

.FILL
Only the names  proc, loc,  msg, and rsp  may vary  from the  example
above, except  that one  may declare  the procedure  INTERNAL if  one
wishes to use it across files.

Whenever  the external integer _ERRP_  is loaded with LOCATION(proc),
the error handler will  call proc before it  does anything else.   It
will set loc to  the core location of the call  to the error handler.
Msg  will be  the message  that it  would have  printed.  
Rsp will be non-NULL only if the error was from a USERERR which had
response string argument.
Proc can do anything that  a simple procedure can do.  When it exits,
it should  return an  integer which  tells the  error handler  if  it
should do anything more.  If the integer is 0, the error handler will
(1)  print the  message, (2)  print the location, and (3) query the tty
and dispatch on the response character (i.e ask for a <cr>, <lf>, etc.).
If the right half of the integer is non-zero, it is taken as the ascii for
a character to dispatch upon.
The left half may have two bits to control printing.
 If bit 17 in the integer is on,
message printing is inhibited.  If bit 16 is on, then the location printing is
inhibited. 
For example, "X"+(1 LSH 18) will cause the location to be printed and the
program exited. "C"+(3 LSH 18) will cause the error handler to continue
without printing anything.


Note that simple  procedures can not do  a non-local GOTO.   However,
the  effect of  a non-local  GOTO  can be  achieved in  a  user error
procedure by loading the external integer _ERRJ_ with the LOCATION of
a label. 
The label should be a on a call to a non-simple procedure which does the desired
GOTO.
The error handler clears _ERRJ_ before calling the procedure
in  _ERRP_.  If _ERRJ_  is non-zero when the  user procedure returns, and continuing
was specified, 
then the error handler's exit  consists of a simple transfer to  that
location.

WARNING! Handling errors from strange places like the string garbage
collector and the core management routines will get you into deep 
trouble. 

A user error procedure has been written which gives a traceback through the 
run-time stack.  The traceback routine lists the name of each non-simple 
calling procedure and the location (in octal) of the PUSHJ it did, starting with
the most recently called procedure and ending with the main procedure of the 
current process.

The procedure is currently available via REQUIRE "LIBSA7[1,JFR]" LIBRARY or
via REQUIRE "WALK.REL[1,JFR]" LOAD_MODULE.  The procedure will move to the 
system LIBSA7 as soon as possible.  

To use the procedure say EXTERNAL PROCEDURE _TRON_; ... _TRON_; COMMENT _TRON_
is for "trace on";.

Subsequent run-time errors will give the traceback, then request the usual response.
To get the traceback at any time, say EXTERNAL PROCEDURE WALK; ... WALK;.  This
can be useful in checking recursion level or in other debugging.

To intercept the trackback, say EXTERNAL PROCEDURE UMWALK(INTEGER LOC); ... 
UMWALK(LOCATION(user_procedure));.  Then  user_procedure("NAME",LOC) is called 
once for every procedure in the traceback chain, instead of printing 
"CALLED FROM "&NAME&" AT "&CVOS(LOC)&CRLF on the terminal.

To discontinue tracing on errors:  EXTERNAL INTEGER _ERRP_; ... _ERRP_←0;.
.SEC |INEXHAUSTIBLE STRING SPACE|

The string garbage collector has been modified to expand string space
(using discontiguous blocks) whenever necessary to satisfy the demand
for places to put strings. To take advantage  of  this  feature,  one
need not change his programs.

Here are some points which might be of interest, however:

.LIST(4,0); 
1)\Although  we  are  going  to  provide  user control over all size
parameters eventually, currently only  the  initial  string  space
size  is  settable  by  the  user, either via REQUIRE or the ALLOC
sequence, as before.  The size of each string space increment will
be  the same as the original size, which need not be monstrous any
more unless you  know that all runs of your program will  need  a
monstrous  string  space  anyhow.   The  threshold (see below) for
expanding will be set at 1/8  the  string  space  size  (increment
size).

2)\One can, in his program, modify these values independently, if he
is willing to use the USERCON function, and to follow this format:
.NOFILL; LPTFONT;

     USER TABLE ENTRY NAME 		VALUE
	STINCR		lh: number of chars. in increment
			rh: number of words in increment + 4

	STREQD		lh: number of chars. in threshold
			rh: number of words in threshold.

.FILL; SELECT 1;
3)\The threshold.
After garbage collection, let us say that M-1 discontiguous string
spaces  are  full,  and  the  M'th  has  n  free  characters in it
(available for new strings).  The  garbage  collector  was  called
because  some routine wanted to create a string R characters long,
and there were not that many  available (free).     After  garbage
collection,  the new algorithm requires that N be greater than
R+LH(STREQD).  If it is not, expansion takes place (to M+1 spaces),
to  satisfy  this requirement.    In other words, if STREQD is 1/8
the size of the current space, that space will not be  allowed  to
become  more  than  about  7/8  full.   This helps avoid frequent,
nearly useless calls on the garbage collector when  space is about
gone.   All but the current space are allowed to become as full as
possible, however.

4)\New statistics are maintained by the  garbage  collector.     Soon
there  will  be a built-in routine you can use to print them.  For
now, you may look at them using USERCON, although this  document  does
not  say  what  they  are.     In  order to activate timing of the
garbage collector (slows it down), set SGCTIME in the  user  table
to -1.

5)\Future plans.
The  new  structure  not only allows expansion of string space, it
also will  allow  for  partial  garbage  collections  (no  visible
benefits  except  increased speed, since a partial collection will
be almost as effective as a complete one, and  much  faster),  and
the  ability  to  move  string  space  blocks, in order to compact
memory.  Push on your local representative  to  get  these  things
done.
.END
.SEC |RECORD STRUCTURES|

.SS |INTRODUCTORY REMARKS|

Record structures are a fairly recent addition to SAIL.  Essentially,
they provide a means by which a number of closely related variables
may be allocated and manipulated as a unit, without the overhead or
limitations associated with using parallel arrays.
In the current
implementation, each record is an instance of a user-defined "record
class", which serves as a template describing the various subfields 
of the record.  Internally, records are small blocks of storage which
contain space for the various subfields and a pointer to a class 
descriptor.  Subfields are allocated one per word and are accessed
by constant indexing off the record pointer.  Deallocation is perormed
by a garbage collector.

Records were originally added to SAIL to fullfill
a number of very specific needs at Stanford, and were subsequently
generalized to the form seen here.  The structures described in this 
section are implemented and, so far as is known, work correctly.
(They have been used successfully over the past 3 months by several
different people to produce a number of sizable programs).
However, a number of fine points have yet to be cleaned up before
SAIL records can be considered to be "finished".  Also, several aspects
of the existing implementation are still quite ugly, and may be substantially
modified in the future, although the language constructs seen by the
user are apt to stay about the same.  The material presented here
should therefore be considered to be PRELIMINARY DOCUMENTATION ONLY.
It is being supplied only in response to numerous requests for such
documentation, and with the understanding that the system described
is still in an adolescent -- though usable -- stage.
Readers are strongly urged to look
at the file RECAUX.SAI[CSP,SYS], which contains a number of useful
examples and auxilliary functions.  

.SS |RECORD CLASS DECLARATIONS|
.NOFILL

	RECORD_CLASS <classid> (<subfield declarations>)

For instance,

	RECORD_CLASS VECTOR (REAL X,Y,Z);
	RECORD_CLASS CELL (RECORD_POINTER(ANY_CLASS) CAR,CDR);
	RECORD_CLASS TABLEAU (REAL ARRAY A,B,C;INTEGER N,M);
	RECORD_CLASS FOO(LIST L;ITEMVAR A);

.FILL
Generally, the <subfield declarations> have the same form as 
a procedure's formal paramter list, except that the words
VALUE and REFERENCE should not be used.  Also, STRING subfields
are not yet implemented.  Each record class declaration is compiled
into a "record descriptor" which is used by the runtime system
for allocation, deallocation, garbage collection, etc.  

.SS |RECORD POINTER DECLARATIONS|
.NOFILL

	RECORD_POINTER(<classid list>) <id list>
	RECORD_POINTER(ANY_CLASS) <id list>

For instance,

	RECORD_POINTER(VECTOR) V1,V2;
	RECORD_POINTER(VECTOR,TABLEAU) T1,T2;
	RECORD_POINTER(ANY_CLASS) R;

.FILL
At runtime, these variables either contain the value NULL_RECORD
(internally, zero) or else contains a pointer to a record.
The <classid list> is used to make a compile-time check on
assignments and subfield references.  The pseudo-class ANY_CLASS
matches all classes, and effectively disables this compile-time
check.  For instance:
.nofill

	RECORD_POINTER(FOO,BAR) FB1,FB2;
	RECORD_POINTER(FOO) FB3;
	RECORD_POINTER(CELL) C;
	RECORD_POINTER(ANY_CLASS) RP;
	:
	COMMENT the following are all ok syntactically;
	C←NEW_RECORD(CELL); 
	RP←C;	
	FB2←NEW_RECORD(FOO);
	FB1←FB3;
	FB3←RP; COMMENT Note that this is most likely a runtime bug
			Since RP will contain a cell record.  SAIL
			won't catch it, however;
	CELL:CAR[RP]←FB1;

	COMMENT The compiler will complain about these: ;
	FB1←C;
	FB3←NEW_RECORD(CELL);
	RP←CELL:CAR[FB3];
	
.FILL
NO runtime class information is kept with the variable, and no runtime
class checks are made on record assignment or subfield access.  
Record pointer variables are allocated quantities, and should not appear
inside SIMPLE procedures.   They resemble lists in that they are not
given any special value upon block entry and they are set to a null value
(NULL_RECORD) when the block in which they are declared is exited.
(This is so that any records referred to only in that block can be
reclaimed by the garbage collector.)  

.SS |ALLOCATION|
Records are allocated
by means of the construct
.NOFILL

	NEW_RECORD(<classid>)

.FILL
which returns a new record of the specified class.  All subfields of
the new record are set to the "null" or "zero" value for that subfield
-- i.e., real & integer subfields will be set to 0, itemvar subfields
will be set to ANY, lists will be set to PHI, etc.
Again, note that entry into a 
block with local record pointer variables does NOT cause records
to be allocated and assigned to those variables.

.SS |SUBFIELDS|

Record subfields are referenced by means of the construct
.nofill

	<classid>:<fieldid>[<record pointer expression>]

.FILL
and may be used wherever an array element may be used.
For example
.nofill

	RECORD_POINTER(VECTOR) V;
	RECORD_POINTER(CELL) C;
	RECORD_POINTER(FOO) F;

	:
	VECTOR:X[V]←VECTOR:Y[V];
	CELL:CAR[C←NEW_RECORD(CELL)]←V;
	VECTOR:Z[V]←VECTOR:X[CELL:CAR[C]];
	SUBLIS ← FOO:L[F][1 TO 3];
	:

.fill
If the <record pointer expression> gives a null record, then a runtime
error message will be generated.  This is the only runtime check that
is made at present.  I.e., no runtime checks are made to verify that
the <classid> in the subfield statement matches the class of the
record whose subfield is being extracted.

An array subfield may be used as an array name, as in
.nofill

	RECORD_POINTER(TABLEAU) T;
	:
	TABLEAU:A[T][I,J] ← 2.5;

.fill
provided that you have stored a valid array descriptor into the subfield.
Unfortunately, SAIL does not provide any clean way to do this.  One unclean
way is
.nofill
	INTEGER PROCEDURE NEWARY(INTEGER LB,UB);
		BEGIN
		INTEGER ARRAY A[LB:UB];
		INTEGER AA;
		AA←MEMORY[LOCATION(AA)];
		MEMORY[LOCATION(AA)]←0;
			 COMMENT defeats deallocation;
		RETURN(AA);
		END;
	:
	RECORD_CLASS FUBAR(INTEGER ARRAY A);
	RECORD_POINTER(FUBAR) FB;
	:
	MEMORY[LOCATION(FUBAR:A[FB])]←NEWARY(1,100);
.fill

(Warning: the above "advice" is primarily intended for hackers; we
make no promisses that it will never get you into trouble, although
this particular trick is unlikely to be made obsolete in the forseeable
future).

.SS |INTERNAL REPRESENTATIONS AND IMPLEMENTATION NOTES|

Records are allocated by a "small block" allocator that gets large
buffers of storage from the normal SAIL free storage system.  
Each record currently has the following form:
.nofill

	-1:	<used by garbage collector & free storage system>
	 0:	20,,<record class descriptor>
	+1:	<first subfield>
		      :
	+n:	<last subfield>
.fill
Record pointer variables point at word 0 of such records.  Eventually,
we may do away with "-1" word altogether.

Record class descriptors currently have the form:
.nofill

    	0:	byte(13)length(5)0(18)<record handler procedure>
	1:	<descriptor for first field>
		:
	n:	<descriptor for last field>
      n+1:	<SAIL-format string descriptor
      n+2:	 for class name>
      n+3:	ascii text for class name

.fill
The normal value for the handler procedure is $REC$, which is the standard
procedure for such functions as allocation, deallocation, etc.  Currently,
this procedure is usually called as the result of user uuo RECUUO (=8).
which, in turn, does a pushj p,@<effective address>.  Thus:
.nofill

	RECUUO	OP,RV	;OP = minor op code.  RV = record variable

goes (roughly to)

	<save acs>
	PUSH	P,[OP]
	PUSH	P,RV
	PUSH	P,[0]	;this extra argument is sort of random.
			;It was intended for expansions.  Instead,
			;it may eventually be flushed.
	PUSHJ	P,@RV		
	< restore acs (except ac1) >

.fill
It is possible for a user to substitute his own
handler procedure for a given class of records by including the procedure name
in brackets after the record class declaration:
.nofill

	RECORD_CLASS <id> (<subfields>) [<handler>]

This handler must have the form

	RECORD_POINTER(ANY_CLASS) PROCEDURE <procid>
			(INTEGER OP;RECORD_POINTER(ANY_CLASS) R1,R2);

.fill
Where OP will be a small integer saying what is to be done.  The current
assignments for OP are:
.nofill

	OP value	meaning

	0		invalid
	1		allocate a new record with same type as R1
	2		not used
	3		not used
	4		Mark all subfields of record R1
	5		Delete all space for record R1

.fill
However, NO promisses are made concerning future assignments or, indeed,
concerning the general structure.  This feature is primarily intended 
for use by wizards, and others use it at their peril.


.SEC |MISCELLANEOUS NEW FEATURES|
.SS|NEW MTAPE OPTIONS|
.nofill

	MTAPE(chan,NULL)

.fill
will cause an MTAPE 0 to be issued for channel chan.  For mag. tapes,
this will cause you to wait until all activity ceases.  For other
devices, various random things can happen, depending on the device
and system.

In export SAIL, MTAPE(chnl,"I") sets the 'IBM compatible'
mode for a tape drive.  (It does an MTAPE chnl,101.)

These features do not work in TENEX SAIL.  Full access to TENEX magtapes
is obtained through the MTOPR, GDSTS and SDSTS routines, which are
TENEX-only runtimes.

.ss|INITIALIZATION PHASES|

User initializations  are  now done  in successive  phases, with  all
initializations   required   for   one   phase   being  done   before
initializations required for the next phase. 
.NOFILL

Syntax:

	REQUIRE <procid> INITIALIZATION;
	REQUIRE <procid> INITIALIZATION [<phase no>];

where <phase no> is an integer constant. 

Semantics:
.FILL

<phase no> specifies  the number  of the user  initialization
phase.  If  it is left out,  then one is used.   Currently, there are
three  phases, numbered 0, 1, and  2.  If the  demand is great enough,
additional phases may  be added later.   (Note for assembly  language
hackers: internally, user phases are numbered '400000, '400001, etc.)

.SS|CHNCDB|

	val←CHNCDB(channel)

This integer procedure returns a pointer to the three word block used
to open the  specified channel.   It is provided  for the benefit  of
assembly language procedures that may want to do I/O inside some fast
inner loop, but which may want to live in a SAIL core image & use the
SAIL OPEN, etc. 

This feature does not work in TENEX SAIL.  See a hacker if you want
these features.

.SS |ARRCLR|
.nofill

	ARRCLR(arry)
.FILL
This new runtime routine clears any kind of array. That is, arthmetic 
arrays get filled with zeros, string arrays with NULLs, and itemvar
arrays with ANYs.  
One may use ARRCLR with set and list arrays, but the set and list
space will be lost (i.e. un-garbage-collectable). 
The alternative form:
.nofill

	ARRCLR(arry,val)

.fill
where val is either an integer or a real number, will fill arry with
that value.  Do not do this to string or list arrays unless you do
not care whether or not your program works.  Also using a real val for
an itemvar array is apt to cause strange results. (If you use an integer,
arry will be filled with CVI(val).)

.SS |SETPL|
.nofill

	SETPL(channel, @linnum, @pagnum, @sosnum)
.fill
This new runtime routine allows one to keep track of the string input from
CHANNEL.  Whenever a '12 is encountered, LINNUM is incremented.  Whenever
a '14 is encountered, PAGNUM is incremented, and LINNUM is zeroed.  Whenever
an SOS line number is encountered, it is placed into SOSNUM.  When fully
implemented (soon), this will work on the INPUT, INTIN, and REALIN functions
as well.

.SS |EVALREDEFINE|
EVALREDEFINE bears the same relationship to REDEFINE as EVALDEFINE does to DEFINE.
See pages 47 and 50 of the Manual.

.SS|CVPS|
CVPS(<macro_parameter>) converts <macro_parameter> to a string and returns
the string. See about macro parameters on page 48 of the manual.

.SS|EXPRESSIONS IN REQUIRES|
Previously, all REQUIRE constructs had to have only constants in them. Now
SAIL allows compile time expressions as well. See about compile time 
expressions on page 47 of the Manual. 

.SS|RELEASE|
RELEASE now takes an optional second argument, the CLOSE inhibit bits.
These are described in the UUO manual (Stanford System). These are defaulted
to zero when not specified so that 
old programs which did not specify them will work as before. 

The CLOSE inhibit feature only works at SU-AI.
.SS|TTYUP|
.nofill

	oldval←TTYUP(newval)

.fill
This routine casuse conversion of lower case characters (a-z) to their
upper case equivalents for strings read by any of the SAIL teletype routines
that do not use break tables.  If newval is TRUE, then conversion will
take place on all subsequent inputs until TTYUP is called with newval
FALSE.  Oldval will always get set to the value of newval used in the
previous call. (If TTYUP has never been called, then no conversions will
take place, and the first call to TTYUP will return FALSE).

In TENEX, TTYUP sets the system parameter using the STPAR jsys to convert
to upper case.

.SS|BREAKSET MODES ⊗≡⊗K⊗≡⊗ AND ⊗≡⊗F⊗≡⊗|
A "K" specification as a BREAKSET mode will cause lower to upper case
conversion when that break table is used.  Conversion takes place before
each character is checked for breaking or omission.  An "F" specification
turns off the conversion -- i.e. it undoes the effects of "K".

.SS|INOUT|
.nofill

	INOUT(inchan,outchan,howmany)

.fill
INOUT reads howmany words from channel inchan and writes them out on
channel outchan.  Each channel must be open in a mode between 8 and 12.
on return, the EOF variables for the two channels will be the same as if
ARRYIN & ARRYOUT had been used.  If howmany is less than zero, then
transfer of data will cease only upon end of file or a device error.

(note: INOUT uses BLTs to transfer data directly from one set of buffers
to the other)

INOUT is not available in TENEX SAIL.
.SS|GETSTS & SETSTS|
.nofill

	SETSTS(chan,new_status)

issues a SETSTS uuo on channel chan with the status value new_status.

	status←GETSTS(chan)

.fill
returns the results of a GETSTS uuo on channel chan.

These functions do not exist in TENEX SAIL.  Instead, see GTSTS, GDSTS,
STSTS, and SDSTS for analogous features.

.SS|CHANGES TO ⊗≡⊗OPEN⊗≡⊗ ERROR HANDLING|
If the EOF variable supplied to OPEN is non-zero and the device name
is invalid, then OPEN will fail without giving the error message
"INVALID DEVICE NAME FOR OPEN", and the EOF value will be unchanged.
If a device is unavailable, and EOF=0, then the user is now given the
options of trying again or going on without opening the device, in which
case EOF will be set to non-zero as usual.

.ss|ASH|
ASH has been added as an arithmetic operator.  Its syntax is just like that
of LSH, and it generates similar code (except for putting out a
PDP-10 ASH instruction instead of a LSH).

.SS|ARG_LIST|
.nofill

	ARG_LIST(<arg1>,...,<argn>)

.fill
where each <arg> may be any valid argument to the REF_ITEM construct,
assembles a list of "temporary" reference items that will be deleted
by APPLY after the applied procedure returns.  Thus
.nofill

	APPLY(proc,ARG_LIST(foo,bar,VALUE baz))

is roughly equivalent to

.begin verbatim
	tmplst←{{REF_ITEM(foo),REF_ITEM(bar),REF_ITEM(VALUE baz)}};
	APPLY(proc,tmplst);
	WHILE LENGTH(tmplst) DO DELETE(LOP(tmplst));
.end

.FILL
but is somewhat easier to type.  Note that the reference items created
by ARG_LIST are just like those created by REF_ITEM, except that they
are marked so that APPLY will know to kill them.

.ss CLOSE


The CLOSE function now has an additional optional argument
that allows the CLOSE inhibit bits to be turned on.  The second argument
is the bit pattern for the inhibition, and it is defaulted 0.  See the
UUO manual for details.  

This feature is available only at SU-AI, and is not available in 
the TENEX version of SAIL.
.ss TYPEIT
The number returned by the TYPEIT procedure (which identifies
the type of the datum of its item expression argument) is now changed
for arrays.  Now it is '24 plus the scalar value of the type (e.g., INTEGER),
whereas before it was '15 plus the scalar value.

Additional types added to TYPEIT are:  '16 for labels, '17 for
record classes.
.ss COMPARISON OF .REL FILES
Starting with version 18, the compiler emits information
into each .REL file containing the version of the compiler used.  Then,
during the SAIL initialization sequence, these versions are compared, and
a warning message is issued if necessary.  Thus, the problem of converting from one
version of the compiler to a new version is lessened.  This feature
may not work as well in the  current changeover as it will in the future.
.ss SCAN Optimizations
The SCAN function has been modified to return true substrings
instead of copies in those cases that the break table in question was
not omitting any characters.  This should be an improvement in the
efficiency of those routines.
.ss BREAK TABLES
There are now 54 user-setable break tables available to the
SCAN, INPUT, TTYINL functions, as well as SETBREAK and BREAKSET.  These
tables are allocated and deallocated dynamically.

In addition, GETBREAK now returns the value of the smallest
unallocated breaktable, and RELBREAK releases its table argument.
The implicit declarations of these new runtime routines are:
.begin center

INTEGER PROCEDURE GETBREAK
PROCEDURE RELBREAK(INTEGER TABLE)

.end
NOTE:  a breaktable is allocated by either GETBREAK, SETBREAK, BREAKSET or STDBRK.
A breaktable is de-allocated (and thereby made available to GETBREAK) by
RELBREAK.  Breaktables are stored in groups of 18, so it is more efficient
to use all the tables in a given group before going to another group.  The
use of GETBREAK is particularly recommended for load-modules and the like,
so that conflicts will be minimzed.  Breaktable zero is special.  It is
predeclared to produce the same results as SETBREAK(0,NULL,NULL,"I").  This
results in break-on-count for calls to INPUT, and always returns the whole
string for SCAN.  Breaktable zero is stored along with breaktables 1 to 18,
and thus takes up no additional space.

HACKERS:  Actually there are 17 additional system breaktables which are
reserved for
use by the SAIL runtime system.  These tables are numbers -17 through -1, and
are ordinarily not available to the user.  They will be used by the debugger
and by additional SAIL system software.  

The user can obtain access to breaktables -17 through -1 by setting
BRKPRV(USER) to -1, for example by the USERCON function which accesses the
SAIL user table.  WARNING:  absolutely no guarantees are made to the user
who accesses these breaktables.  This information is intended for completeness
only; the use of these special breaktables by the user is not recommended.

.ss CV6STR
CV6STR does what you always wished CVXSTR did.  I.e., it stops converting
as soon as it sees a blank rather than always returning a six-character
string.  Example: CV6STR(CVSIX("XYZ"))="XYZ", not "XYZ   ".  Use some today.

.ss TENEX RUNTIMES
The TENEX version of SAIL now has these additional teletype-oriented
routines:  STTYP, GTTYP, STPAR, STI, and DELNF, all named after jsyses.  
See TENEX-specific
documentation.

.MAN_BACK
.EVERY HEADING (,,);
.PORTION TITLEPAGE
.turn on "→{↑"
.SELECT 1
STANFORD ARTIFICIAL INTELLIGENCE LABORATORY→{(↑MONTH)} {YEAR}
.SKIP 6
.SELECT 2; CENTER
SAIL USER MANUAL
.SELECT 1;
.SKIP 1
UPDATE
.SKIP 3
James R. Low
John F. Reiser
Hanan J. Samet
Robert L. Smith
Robert F. Sproull
Daniel C. Swinehart
Russell H. Taylor
Kurt A. VanLehn
.SKIP 10
ABSTRACT
.FILL;CRSPACE;INDENT 0,0;ADJUST
.SKIP 1;
This document describes recent changes to the SAIL language
since the "new" manual (AIM-204) was published in July 1973.
It reflects the various new features implemented 
as of 24 October, 1974 for SAIL version 8 and
corrects a number of minor errors in the earlier manual.